Bobbins Babylock /Brother 10 PK NN-34-5

10 Bobbins for Brother and Babylock Sewing Machine

Babylock BL2100, BL2150, BL6000, BL6150, BL6200, BL6600, BL6700, BL7500, BL8000, BL8500, ESE, ESE2, ESG, ESG2, ESG3, ESI, ESI2, ESL, ESN, ESP, -
Brother PC2800, PC3000, PC5000, PC6000, PC6500, PC7500, PC8200, PC8500, PE150, PE170D, PE180D, PE190D, PE200, PE300S, PE400D, PS1000, PS1250, PS1800, PS1950, PS2100, PS2200, ULT2001, ULT2002, ULT2003D, -
Simplicity SE1, SE2, SE3
Alternative number 136492-001

Never wind thread onto a bobbin that already has thread on it.
If there is thread already on a bobbin and you need to use a different color or thread type then use a different bobbin or remove the existing thread from the bobbin before you wind new thread.
The reason is that the end of the existing thread may get tangled in the new thread and jam your bobbin or cause other problems and also the new thread will not wind evenly over the old thread and therefore will not unwind evenly during use and will cause tension problems.

Center tail – After you wind a bobbin you must cut off the end of the thread that is coming out from the center of the bobbin.
This must be cut off close to the bobbin so that there is no tail of thread sticking out.
A thread tail can interfere with bobbin rotation and cause tension problems.

Over filled – Make sure your bobbins are not over filled with thread