You are here: Home > Westalee Ruler Work Store > Video Tutorials for Westalee Rulers and Templates
We found 0 results matching your criteria.
Free Motion Quilting Ruler Feet and Template Designs by Westalee Design.

Video Tutorials for Westalee Rulers and Templates for Domestic Sewing Machine Free Motion Quilting. Domestic Machine Ruler Foot by Westalee Design

Free Motion Ruler Work for Domestic Machines Quilting with Rulers on a Domestic Machine with a Ruler Foot designed to work on most makes, that comes in a High and Low Shank and is adjustable.
The Westalee Ruler Foot, a true 1/2" round Foot, opens up your creative side by enabling you to stitch with the guidance of a Template, a wide variety of designs normally reserved for the Longarm Machine Quilters.
The Rulers / Templates shown below have been designed to suit your Domestic Machine.
The Low Shank group of machines only has a small clearance between the needle plate and the bottom of the presser foot rod, we have compensated for this and produced an extensive range of designs in 3mm clear cast acrylic.
The High Shank machines do have a little more clearance and this can vary from machine to machine, we recommend using a 4.5mm thick Ruler for all High Shank Domestic Sewing Machines.
If you already have a selection of 6mm or 1/4" templates, they will work from the front and to the sides only, do not attempt to use them from behind, you could damage your machine




Ladies Tension is vital! I have learned so much from this Video





Watch guidance for installing your foot really important!












































Bernina 830
Showing the High Shank foot
Then showing Medium Shank Foot
Bottomline - your machine is your responsibility use the correct foot with correct ruler
and avoid damage to your machine


Free Motion Quilting Ruler Feet and Template Designs by Westalee Design. Free Motion Quilting Made Easy.